HLB LONGMEN PROCESSING CENTER（HLG SERIES）
inquiry
1 Piece (MOQ)
Product Details
Product parameters
Equipment Introduction: This equipment SETS milling, drilling, tapping as one ofthe automatic composite profile processing center, suitable for various lengths ofsteel, copper, aluminum and non-metal profile, plate processing
Configuration introduction: Use 150mm diameter BT40 spindle, imported high-end CNC system, equipped with automatic chip removal machine.
Application: Steel profile, plate processing.
HLG 3020 PARAMETER TABLE HLG 3020 Series Technical parameter table
| Project | Unit | Parameter | |
| TOOLS | Tool changer format | Disc type | |
| Spindle taper | BT40 | ||
| Tool capacity | sec | 16 | |
| Tool change time | sec | 1.8 | |
| Pull studs format | 45° | ||
| LUBRICATING SYSTEM | Lubricating system | Automative lubricating | |
| Cooling system | Water cooling system | ||
| POWER | Electricity | KVA | 30（380V、50HZ）KVA |
| Gas source | mpa | 0.6Mpa-0.9Mpa | |
| MECHNICAL SPECIFICATION | Operating system | MITSUBISHHI | |
| Overall height | About 3800 | ||
| Machine width | mm | About 4300+1300 | |
| Overall length | mm | About 6200+800 | |
| Area | mm³ | About 6200*4300+1300 | |
| Weight | KG | About 16000KG |
| Project | Unit | Parameter | ||||
| TRAVELS | X Axis | mm | 3000 | |||
| Y Axis | mm | 2000 | ||||
| Z Axis | mm | 800 | ||||
| The distance from the nose of the spindle to the end of the table | mm | 130 | ||||
| Move | Moving speed X/Y/Z | m/min | 40 | 40 | 20 | |
| Cutting feed rate X/Y/Z | mm/min | 15000 | 15000 | 15000 | ||
| PRECISION | Cutting feed rate X/Y/Z | mm | 0.05 | 0.03 | 0.03 | |
| Repeat positioning accuracy X/Y/Z | mm | 0.023 | 0.03 | 0.03 | ||
| Spindle | Maximum speed | rpm | 12000 | |||
| Spindle taper | BT40 Standard taper | |||||
| Spindle taper | mm | 150 | ||||
| PORWER OF MOTOR | Driven motor | Power X/Y/Z | mm | 3.0+3.0/3.0/3.0 | ||
| Spindle driven motor | Power | KW | 7.5 | |||
