HPC | BT40 PROFILE MACHINING CENTER
inquiry
1 Piece (MOQ)
Product Details
Product parameter
Equipment description: This equipment is a set of milling, drilling, tapping as one of the automatic composite profile processing center, suitable for processing various lengths of steel, aluminum, copper metal and non-metal profile processing
Configuration introduction: BT40 spindle taper hole with diameter of 150mm; X/Y/Z axis adopts imported high-rigidity 45# wire rail; Imported high-end control system; High power servo motor, super rigid equipment
Application fields: mechanical parts, rail transit, aerospace, military machinery, linear module guide rail, etc
Features Overview: X/Y/Z axis three-axis screw drive, high bed structure, high precision, good protection, easy chip removal
HPC Series Technical parameter table
| Project | Unit | Parameter | ||||
| Itinerary | X-axis (spindle moves left and right) | Mm | 2500 | |||
| Y-axis (the spindle moves back and forth) | Mm | 600 | ||||
| Z-axis (spindle moves up and down) | Mm | 700 | ||||
| The closest distance from the nose end of the spindle to the end of the workbench | Mm | 150 | ||||
| T-slot | T-slot width | Mm | 18mm | |||
| T-type slot number/center spacing | Mm | 2/320mm | ||||
| Inward | Three axes | Unknown | Y | Z | ||
| Fast movement speed | M/min | 36 | 28 | 28 | ||
| Maximum feed speed | M/min | 36 | 28 | 28 | ||
| Cutting feed | Mm/min | 1~15000 | 1~15000 | 1~15000 | ||
| Positioning accuracy (the whole process) | Mm | 0.02 | 0.01 | 0.01 | ||
| Repeated positioning accuracy | Mm | 0.02 | 0.02 | 0.02 | ||
| Three-axis drive | Three-axis servo motor | Rated power | Kilowatt | 3 | 3 | 3 |
| Maximum torque | N.m | 68 | 45 | 45 | ||
| Maximum output speed | Rpm | 3000 | 3000 | 3000 | ||
| Spindle servo motor | Spindle power | Kilowatt | 11/18.5 | |||
| Rated torque | N.m | 52.5 | ||||
| Maximum torque | N.m | 118 | ||||
| Maximum output speed | Rpm | 12000 | ||||
| Main axis | Maximum rotational speed | Rpm | 12000 | |||
| Spindle diameter | Mm | 150 | ||||
| Transmission mode | Direct form | |||||
| The method of drawing a knife | BT40 four-valve claw | |||||
| Spindle hole | Taper 7/24 taper NO.40 | |||||
| Spindle balance level | G1 (ISO1940) | |||||
| Installation method | Vertical | |||||
| Knife library | Knife warehouse form | Disc type | ||||
| Knife handle specifications | BT40 | |||||
| Number of knives | Hold | 24 | ||||
| Maximum tool diameter (full knife)/length/weight | Mm, kg | Φ80mm/300mm/8kg | ||||
| Diameter of adjacent empty knife | Mm | Φ125 | ||||
| Knife change time (knife to knife) | Sec | 1.8 | ||||
| Reduction ratio of knife changer reducer | 1:08 | |||||
| Cooling and lubrication power | Electric power | KVA | 30 (380V, 50Hz) KVA | |||
| Gas source | Master of Public Administration | 0.6Mpa-0.9Mpa | ||||
| Screw lubrication | Automatic rail oil lubrication device | |||||
| Guide rail lubrication | Automatic rail oil lubrication device | |||||
| Cooling motor power | Kilowatt | 0.75 | ||||
| Cutting and cooling | Water-spray cutting cooling system | |||||
| Machine tool size | Machine tool height (Z-axis positive limit) | Mm | About 3700 | |||
| Machine tool width (Y-axis negative limit) | Mm | About 3400 | ||||
| Length of the whole machine + chip removal machine | Mm | About 6100 | ||||
| Weight of the whole machine | Kilogram | About 10,000 | ||||
| Machine tool operating environment requirements | Power supply requirements | 3Φ380V 50HZ | ||||
| Operating ambient temperature (average temperature not higher than 35℃ within 24 hours) | ℃ | 5～40 | ||||
| Relative humidity of operating environment | % | 30—75 | ||||
| * Vibration intensity | Less than 0.5G | |||||
| Stay away from dusty, corrosive/organic gas environments | ||||||
| Grounding resistance | Less than 10 ohms (need to be grounded separately, not grounded in series) | |||||
